Often workshops or DIY customers will fit a lockup kit while the battery is still connected. This can have adverse effects, causing strange behaviour including Switch TCC ad Lock Up lights not displaying correctly on the switch.
To correct the issue,
- locate the lock-up kit fuse (in the wiring harness)
- Remove fuse for ~1 minute to allow the module to reset
- Reinsert the fuse
- Test if module now displaying the correct behaviour
*Note - if the customer cannot find the fuse, disconnect the module or worst case the battery will achieve the same result.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article