The car won't start after installing lockup kit

In most cases, workshops don't disconnect the battery before fitting the lockup kit to the car and can lead to issues such as the car not starting or strange behaviour from the lock-up module.

Check the following:

1. Check the fuses, often they may have popped a fuse during fitting
2. Reset the module (disconnect the fuse or the module for a minute to reset)
3. Check the plugs to ensure they have connected fully
   1. ECU plug connected and locked in place
   2. LockUp Kit
4. Review the wires, get customer to send a picture showing the connections to confirm there is no change in the factory wires