TABLE OF CONTENTS
The Nomad Lock-Up App has a Dashboard area that allows the user to see live data signals from the Nomad Lock-Up Module. Each of these signals is called a widget.
Customising the Dashboard Layout and Widgets
Widget Size
The size of the widgets is adjustable allowing more widgets visible or only a single widget visible. To adjust this:
- Navigate to the Home Menu
- Tap on the 3x horizontal lines - top left - to reveal the Actions Menu
- Tap on Settings
- Scroll down to Gauge Size
- Adjust the slider to the size of the widget to suit you.
- Tap the X at the top of the Settings to return to the Home Menu
Widget Configuration
You can easily add a widget, remove a widget or move the position or order of the widgets easily by:
- Navigate to the Dashboard from the Home Menu
- Press and Hold on the widget you would like to move
- Use the Blue Notepad button to change the signal for the current widget
- Use the Blue Plus buttons to add a new widget to the left or right of the current widget
- Use the Blue Arrow buttons to move the widget left or right to the position you want that widget to be in.
- Use the Red Negative button to remove the widget from the Dashboard
Changing the Signal Shown by a Widget
There are many signal available to display on the Dashboard, however they will differ from vehicle to vehicle. To see what signals you can change a widget to, follow this process:
- Press and Hold on the Widget your would like to change
- Tap on the Blue Notepad button - top centre
- In the list of signals, tap on the signal you want to show - you may have to open the signal groups to see all of the signals.
Signals Available to show on Dashboard Widget
This list may include some signals that are not available for your vehicle/engine/transmission configuration:
| Group | Parameter | Description |
|---|---|---|
| Engine/Vehicle | Engine Speed | Displays Engine RPM |
| Engine/Vehicle | Vehicle Speed | Actual Vehicle Speed in Km/h or Mph |
| Engine/Vehicle | Engine Torque | Calculated Torque output % of the Engine |
| Engine/Vehicle | Accelerator Pedal | Accelerator Pedal Application % |
| Engine/Vehicle | Brake Force | Amount of force applied to the brake pedal |
| Engine/Vehicle | Brake Switch | Indicated if the Brake Light switch is On or Off |
| Engine/Vehicle | Trans Input Shaft Speed | RPM of the Transmission Input Shaft Speed Sensor |
| Engine/Vehicle | Trans Output Shaft Speed | RPM of the Transmission Output Shaft Speed Sensor |
| Engine/Vehicle | Torque Conv Slip | Calculated slip between Engine Speed and Trans Input Shaft Speed |
| Engine/Vehicle | Right Rear Wheel Speed | RPM of the Right Rear Wheel ABS Sensor |
| Engine/Vehicle | Left Rear Wheel Speed | RPM of the Left Rear Wheel ABS Sensor |
| Engine/Vehicle | VSS | Analogue Vehicle Speed Sensor |
| Engine/Vehicle | Shift Selector | Position of the Shifter Selector |
| Engine/Vehicle | Transfer Case | Indicates if the transfer case is in High Range or Low Range |
| Control | Lock Up Preset | Indicates which preset the Nomad Lock Up Module is operating with |
| Control | Current Gear | Current Gear of the Transmission |
| Control | Selected Gear | Indicates the gear the transmission is currently shifting to |
| Control | TCC Selected | Indicates the Nomad Lockup is controlling the Torque Converter Clutch |
| Control | TCC Current | Indicates the OEM Transmission Control Module is controlling the Torque Converter Clutch |
| Control | TCC Sel. Slip | Current Selected Slip of the Torque Converter Clutch |
| Control | TCC Target Slip | Current Targeted slip of the Torque Converter Clutch |
| Control | Lock Up | Indicates the current state of the Torque Converter Clutch OFF =TCC Control is Off FULL = TCC is Fully Locked by the OEM TCM FLEX = TCC is in Flex Lock Control AUTO = TCC is Fully Locked by the Nomad Lockup Module MAN = TCC is Manually Locked by the Nomad Lockup Module |
| Control | Manual Lock Up | Indicates when the Torque Converter Clutch has been manually locked by the Nomad Lock Up Module |
| Diag/Health | Battery | Voltage reading of power supply to Nomad Lockup Module |
| Diag/Health | Faults | Indicates if there are any Faults in the Nomad Lockup Module - Active or History |
| Diag/Health | Active Faults | Indicates if there are any Active Faults in the Nomad Lockup Module |
| Diag/Health | Relay | Indicates the current state of the relay |
| Diag/Health | Low Side Drive | Indicates if the Low Side Driver is On or Off |
| Diag/Health | Low Side Fault | Indicates if the Low Side Driver is in a faulted state |
| Diag/Health | PWM Duty Cycle | Current Duty Cycle output of the solenoid driver |
| Diag/Health | PWM Enable | Indicates if the solenoid driver is On or Off |
| Diag/Health | PWM Current | Output current supplied to the TCC solenoid |
| Diag/Health | PWM Faulted | Indicates if the solenoid driver is in a faulted State |
| Diag/Health | PWM Last Fault | Type of fault experienced during last faulted State |
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article